Industrial Gauges
Specialize in all aspects of harsh environment electronics manufacturing.
2″ – Hourmeter
2″ – Hourmeter
Hourmeter operates by applying battery voltage across the gauges’s register motor to ground. The register increments increase when the key switch in on. Route power through a normally open Oil Pressure switch
2″ – Ammeter
2″ – Ammeter
An ammeter indicates the current flow through the battery charging system. A “zero center” ammeter, during charging, shows a (+) positive reading indicating the current is flowing to the battery (charge). A
2″ – Fuel Level Gauge
2″ – Fuel Level Gauge
Fuel Level gauge operates by sending a low amperage current through the gauges’s meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease
2″ – Pressure Gauge
2″ – Pressure Gauge
A pressure gauge operates by sending a low amperage current through the gauges’s meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease
2″ – Temperature Gauge
2″ – Temperature Gauge
A temperature gauge operates by sending a low amperage current through the gauges’s meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease
2″ – Voltmeter
2″ – Voltmeter
A voltmeter indicates the battery voltage and the general condition of the battery charging system. The meter requires no warm-up and indicates voltage changes instantly. Available for MG systems, J1939 CAN Bus
2″ – Warning Light Indicator
2″ – Warning Light Indicator
